Larson Electronics NVR-NDAA-POE-4CH, Инструкция по эксплуатации

Страница: 121 / 157

121
13
System Configuration
Basic Configuration
1. Click System > Basic.
2. Configure the parameters.
NOTE!

Only users with administrative credentials can set Enable
Password
.

If Enable Password is not selected, no password is required
for local login at system startup. However, a username and
password are still required when you log in after a logout.

Some NVR models support Intelligent Mark. When the NVR
and IP camera are both enabled, the latest areas/lines or
VCA data configured for face detection, intrusion detection,
and cross line detection will be displayed on the Preview,
Behavior and Alarm windows in real time.

Intelligent mark is displayed on the screen as areas/lines in
different colors. Yellow means areas/lines configured for
face detection, intrusion detection, and cross line detection;
green means VCA data has changed but not triggered rules;
red means rules are triggered in the configured area (rules
are configured for VCA alarms), and VCA alarm has occurred.

You may also set startup Wizard here by clicking Wizard .
3.
Click Apply to save the settings.