Larson Electronics NVR-NDAA-POE-4CH, Инструкция по эксплуатации

Страница: 28 / 157

28
4
Channel Configuration
Channel Management
This chapter describes how to add and manage IP devices in your
NVR. The IP devices mentioned in this manual mainly refer to IP
camera (or network camera); sometimes they can also be Digital
Video Server (DVS). Before you start, make sure the IP devices are
connected to your NVR via network.
CAUTION!
An IP device should be connected to one NVR only. An IP device
managed by multiple NVRs may cause unwanted issues.
Adding an IP Device
This section provides multiple options to add an IP device. Some
options are only applicable to certain NVR models. Choose one as
appropriate.
Option 1
1. Click Camera > Camera > Camera . The system automatically
searches for IP devices and lists the discovered.
2. (Optional) To search a specified network segment, click
Search Segment and then set the address range.
3. You may choose one of the following ways to add an IP
device:

Click Add All to add all the discovered IP devices allowed
(depending on channels supported by the NVR).

Click Custom Add . In the window displayed, enter the IP
address and complete other settings, and then click Add . You
may also click Search Segment and add discovered cameras
in the list.