Larson Electronics NVR-NDAA-POE-4CH, Инструкция по эксплуатации

Страница: 31 / 157

31
a. On the IP device's Web interface, go to Setup > Network >
DDNS, enable DDNS, select DynDNS or NO-IP , enter the
domain name that you set up on the DNS website, enter
the username and password, and then click
Save .
b.
On the NVR: Select a protocol, enter the domain name
mentioned above, and then enter the username and
password. The port is the external port of the IP device.
c. Click OK.
NOTE!

If Custom is selected for Protocol , the port is the mapped
external RTSP port of the IP device.

Do not add an IP device to an NVR using different methods
(e.g., IP and MyDDNS) at the same time.

When an IP device is added by MyDDNS, domain name (NO-
IP or DynDNS), or IP (public IP+public port) and it is not
connected to the same router as the NVR, alarm is
configurable, but alarm push is not available.
Option 5
Use this option only when the IP device to add supports the
standard RTSP, and all you need from the IP device are just view
live and playback. IP devices added in this way cannot be
configured from the NVR.
1.
Click Camera > Camera.
2. Click Custom Add .
3. Click to select a camera in the list, select Custom from the
Protocol drop-down list, and then click the Protocol button.
4. In the Protocol window, name the protocol, enter the RTSP
port number, select a transmission protocol, input the
resource paths, and then click
Apply
.