83
5.
Configure trigger actions. Click
right to
Trigger Actions
and set action(s) to trigger. For more details, see
6.
Configure an arming schedule. Click
right to
Arming
Schedule
and then set the time when actions will be
triggered.
7.
Click
right to
Advanced
, and complete the settings.
Set the total number of snapshots to take for a face
during the detection. Up to 30 snapshots are allowed.
Set the maximum and minimum face width. Face width
in the picture within this range will be detected. The
larger the range, the more likely a face will be detected.
Adjust the width as needed to achieve optimal effects.
Intrusion Detection
Intrusion detection is used to detect objects entering specified
area(s) and trigger actions as needed.
1.
Click
VCA > VCA Config > Intrusion Detection.
Содержание NVR-NDAA-POE-4CH
Страница 18: ...18 2 Change the password into a strong one then click OK 3 Set the unlock pattern...
Страница 94: ...94 3 Click Backup to export the counting statistics to a storage device...
Страница 146: ...146 5 Configuration Click Setup on the top and then click the menus on the left to configure parameters...