Kyocera FS-6300, Руководство пользователя

Страница: 59 / 161

2.1. Control Panel
2-5
Control Keys
The control panel keys are used to configure the
printer.
☛
Settings made with these keys effect only the
interface currently in use.
☛
Most of the panel functions can also be controlled by PRESCRIBE 2e commands or
commands generated by application software. The printer obeys the most recently
received printer settings sent from the application software, or from the printer driver,
which take priority over control panel settings.
Key Function
ON LINE
Switches the printer on-line and off-line.
CONTINUE
1. Depending on the message being indicated, there are cases where operation will
continue after pressing the CONTINUE key. If such a message is displayed, oper-
ation will be resumed after pressing this key. (See Table 5.3 )
2.Used as the key in the mode selection function.
STACK
+
1. Selects whether printed pages are delivered to the face-down or face-up tray. The
optional face-up output tray is required to output pages face-up. (See page 1-16 .)
2. Lets you access the desired item or enter numeric values. During mode selec-
tion, this key is used for switching menus and changing mode settings. It has an
auto repeat function that works when the key is pressed and held.
FORM FEED 1. Prints and feeds out one page.
2. Used as the
key in the mode selection function.
CANCEL
1. Abandons a printing job, resets numeric values, or cancels a setting procedure.
2. Turns off the buzzer when the buzzer sounds.
EXIT
MODE
1. When pressed during mode selection, terminates the setting and returns to the
5HDG\
condition.
2. Used to select the emulation, font, character code set; to read an memory card; to
select the automatic cassette mode; and others (See the last page in this manual.).
—
FEED
1. Selects the cassette feed or MP tray feed.
2. Lets you access the desired item or enter numeric values. During mode selec-
tion, this key is used for switching menus and changing mode settings. It has an
auto repeat function that works when the key is pressed and held.
ENTER
STATUS
1. Finalizes numeric values and other selections.
2. Prints a page of status information on all interfaces together (The printer must
be online.).