Kyocera FS-6300, Руководство пользователя

Страница: 111 / 161

4.2. Cleaning
4-7
4.2. Cleaning
In addition to the maintenance procedures described on the following pages, the charger
wire in the drum unit and paper feed unit should be cleaned from time to time, or whenever
print quality problems occur.
To avoid print quality problems, the following printer parts must be cleaned with every
toner container replacement.
☛
If the toner container has been replaced when the message
ý5HSODFHý7RQHUý
&OHDQýSULQWHU
was displayed, the message
ý&OHDQýSULQWHUý3UHVVý
&217,18(
will be displayed after replacement. After cleaning the inside of the
printer following the procedure shown below, press the
CONTINUE
key; the message
will disappear and the printer will be ready for printing.
Main Charger Unit
The main charger unit grid should be cleaned when the toner container is changed.
Cleaning the Charger Wire
1.
Open the printer side cover.
2.
Pull the cleaning knob ( Green ) slowly in and
out a few times. This pulls a cleaning pad
inside the drum unit along the wire.
Side Cover Main Charger Unit
Cleaning Knob
(
Green )