Kyocera FS-6300, Руководство пользователя

Страница: 44 / 161

1.4. Setting Up and Interfacing
1-22
Windows 3.1
To install the printer driver for Windows 3.1, proceed as follows:
1.
Insert the Kyocera Digital Library CD-ROM in your CD-ROM drive.
2.
Start Windows on your computer.
3.
Double click on Control Panel .
4.
Double click on Printers .
5.
Click on Add .
6.
Click on Install .
7.
Select Install Unlisted or Updated Printer under List of Printers .
8.
Click Install .
9.
Select the drive into which you inserted the Kyocera Digital Library CD-ROM, and then
select one of the following directories.
(Standard PCL5E driver)
[CD-ROM Drive Name]:\drivers\[Language]\pcl\3x
(Standard PCLXL driver)
[CD-ROM Drive Name]:\drivers\[Language]\pcl\3x\enhanced
(Standard KPDL driver)
[CD-ROM Drive Name]:\drivers\[Language]\kpdl\3x
Click OK and follow the instructions that appear on the screen.
10.
When the driver is installed, click on Close to close Control Panel .
Test the Interface with the Computer (DOS)
Test that the printer and computer are correctly connected. If you have connected the
printer and computer with a parallel interface cable, follow the procedure below.
1.
Check that the printer’s message display indicates
ý5HDG\
and that the ON LINE
indicator is ON.
2.
Boot the computer in DOS mode, or set the computer to DOS (prompt) MODE.
3.
At the DOS prompt, type the following.
ECHO !R! STAT; EXIT; >PRN
If the printer prints a status page, the computer and printer are connected correctly. For
details on the status page, refer to
Chapter 2 in this manual.
If you do not get this result, check that the cable is securely plugged in at both ends, and
repeat the test. If you still do not get the right result, you may have a defective or improperly-
wired cable. Try using a different cable.