Kyocera FS-6300, Руководство пользователя

Страница: 82 / 161

2.9. Memory Card
2-28
Reading Macros from a Memory Card
Macro data on a memory card can be registered on the printer. Registered macro data can
be used just like macro data located in printer memory. If a memory card already containing
macro data is inserted in the printer, that macro data will be read into the printer automat-
ically when the printer’s power is turned on.
The operation described here is performed when a memory card is inserted while the mes-
sage display reads
ý5HDG\
.
☛
Macro data on a memory card has no effect on printer memory.
1.
Check that the memory card containing macro data is inserted. Bring up the menu
ý
!5HDGýPDFUR
on the message display. This display only appears if a memory card
containing macro data is inserted.
2.
Press the ENTER key.
ý"
will appear.
Press the CANCEL key to stop reading macro data.
3.
Pressing the
ENTER
key again will cause
ý3URFHVVLQJ
to appear in the lower part of
the message display and macro data to be read from the memory card.
4.
After macro data has been read, the message display will return to
ý!5HDGýPDFUR
.
5.
Pressing the EXIT key will cause the message display to return to
ý5HDG\
.
☛
‹
If the name of a macro on the memory card is the same as that in printer memory,
the macro data on the memory card with the conflicting name will not be regis-
tered.
‹
Registered macro data will be lost if the memory card is pulled out. Re-execute
ý
!5HDGýPDFUR
if this happens.
Reading Data (Partitions) from a Memory Card
Specified data (partitions) on a memory card can be read into printer memory.
1.
Bring up the menu
ý!5HDGýGDWD
on the message display. This display only appears
if there is data on the memory card.
2.
Press the
ENTER
key.
ý"
will flash.
3.
You can scroll through data names on the memory card one by one by pressing the
+
key. Press the CANCEL key to stop reading data.
4.
Press the ENTER key while the desired data name is being displayed
ý3URFHVVLQJ
will appear in the message display and the selected data will be read into the printer.
After data has been read, the message display will return to
ý5HDG\
.