Kyocera FS-6300, Руководство пользователя

Страница: 80 / 161

2.9. Memory Card
2-26
2.9. Memory Card
This printer is equipped with a memory card slot. This allows, for example, the use of fonts
other than internal fonts by using an optional font card. If a JEIDA Ver. 4.2 memory card
is used, it is possible to read, write and delete data and format the memory card.
☛
Only 32 MB or less flash or S-RAM type memory card conforming to JEIDA Ver. 4.2
can be written or formatted by this printer.
It is possible to set the partitions on the memory card which you wish to execute for the
printer at power-on by using the PRESCRIBE FRPO I0 command. For details on the FRPO
command, see
Appendix C .
Font cards can be read from the control panel or read automatically upon power-on or
printer reset when a font card is inserted in the printer.
Inserting the Memory Card
Carefully insert the memory card as far as it will
go with the top side facing up.
☛
Follow the precautions below when han-
dling a memory card.
‹
A memory card is sensitive to static
electricity. Before handling a memory
card, be sure to eliminate any static
electricity which may have built up on
your body or clothing by touching a
metallic object.
‹
Use a flash memory card or a S-RAM memory card conforming to JEIDA Ver. 4.2
which is approved by Kyocera.
‹
Be sure that its power is off when inserting or removing a memory card.
‹
Do not insert a memory card into the slot with undue force.
‹
Do not bend a memory card.
‹
Do not drop a memory card or subject them to shock.
‹
Do not splash water or other liquids on a memory card.
‹
Do not place a memory card near fires or heat sources.
‹
Do not subject a memory card to direct sunlight.
‹
Store a memory card in their protective case when not using them.
Memory Card Slot
Memory Card