Kyocera FS-6300, Руководство пользователя

Страница: 149 / 161

C.3. RS-232C/RS-422A Protocol
C-9
C.3. RS-232C/RS-422A Protocol
A protocol is a set of rules the computer follows in sending data to the printer. The RS-232C/
RS-422A parameters are stored in battery backed-up memory. They are indicated on the
status printout. They can be changed by the FRPO (firmware reprogram) command
described in the
Programming Manual . The parameters and their identification codes are
given below.
H1: Baud rate
The factory setting is 9600 baud.
H2: Data bits
7 or 8, factory-set to 8.
H3: Stop bits
1 or 2, factory-set to 1.
H4: Parity
The factory setting is "None" (0 on the status printout).
H5: Protocol logic
The factory setting is 0.
Parameter value Baud rate
12 1200
24 2400
48 4800
96 9600
19 19200
38 38400
57 57600
11 115200
Parameter value Meaning
0 None
1 Odd
2 Even
3 Ignore
Parameter value Meaning
0 Combination of 1 and 3 below
1 DTR/DSR, positive logic
2 DTR/DSR, negative logic
3 XON/XOFF
4 ETX/ACK
5 XON/XOFF recognized only as protocol