Kyocera FS-6300, Руководство пользователя

Страница: 138 / 161

B.3. Special Paper
B-6
B.3. Special Paper
This section explains printing on special paper. The page printer can use the following types
of special paper. In this case, set the media type according to the table below.
When using the above types of paper, be sure to use products that are specified for use with
photocopiers and/or page printers. Feed paper other than colored paper or pre-printed
paper from the MP (multi-purpose) tray.
Use paper that is sold specifically for use with copiers (heat-fusing type). Label paper and
envelopes should not be placed in the cassette; they must be fed manually and delivered in
the face up stack.
Since the composition and quality of special paper vary considerably, special paper is more
likely than white bond paper to give trouble during printing. No liability will be assumed if
moisture etc. given off in printing on special paper causes harm to the machine or operator.
☛
Before purchasing any type of special paper, test a sample on the printer and check
that printing quality is satisfactory.
Specifications for each type of special paper are given below.
Overhead Projection (OHP) Film
OHP film must be able to withstand the heat of fusing during the printing process. It should
satisfy the conditions in Table B.3.
To avoid trouble, OHP film must be delivered face-up.
If OHP film jams frequently, pull the top of the sheet very gently as it leaves the printer.
Paper type Media type
Colored paper
&RORU
Preprinted paper
3UHSULQWHG
Overhead projector transparencies
7UDQVSDUHQF\
Postcards
&DUGVWRFN
Envelopes
(QYHORSH
Label
/DEHOV
Table B.3 OHP Film Specifications
Item Specification
Tolerance of heat Must tolerate at least 190°C (374°F)
Thickness 0.100 to 0.110 mm (3.9 to 4.3 mils)
Dimensional accuracy ±0.7 mm (±0.0276 in)
Squareness of corners 90° ±0.2°