Kyocera FS-6300, Руководство пользователя

Страница: 153 / 161

C.4. RS-232C Cable Connection
C-13
In DOS, enter the following commands:
C:\>MODE COM1:96,N,8,1,P
C:\>MODE LPT1:=COM1
To test the interface, then enter:
CTRL P
C:\>DIR
CTRL
P
The software settings made by the procedures above are temporary. On most comput-
ers, permanent settings must be made with DIP switches.
If you want to use a different baud rate or change any of the other RS-232C parameters,
you can use the printer's FRPO (firmware reprogram) command. See the
Programming
Manual for details.