Kyocera FS-6300, Руководство пользователя

Страница: 144 / 161

C.2. RS-232C/RS-422A Interface
C-4
C.2. RS-232C/RS-422A Interface
RS-232C interface
Interface Signals
The pins of the printer's RS-232C interface connector carry the signals listed in Table C.2 .
The table also indicates whether each signal is incoming or outgoing with respect to the
printer.
Brief descriptions of the signals follow.
FG - Frame Ground - (Pin 1)
This pin is connected directly to the printer frame.
TXD - Transmit Data - (Pin 2)
This output carries asynchronous data sent by the printer to the computer. It is used mainly
in handshaking protocols.
RXD - Receive Data - (Pin 3)
This input carries serial asynchronous data sent by the computer to the printer.
RTS - Request To Send - (Pin 4)
This output is always held high (above 3 volts).
CTS - Clear To Send - (Pin 5)
DSR - Data Set Ready - (Pin 6)
Unused.
SG - Signal Ground - (Pin 7)
All signals can transmit between the printer and the host computer to send each signals
with a signal ground.
Table C.2. RS-232C Signal Pin Assignments
Pin In/out Signal Description
1 – FG Frame ground
2 Out TXD Transmit Data
3 In RXD Receive Data
4 Out RTS Request To Send
5 In CTS Clear To Send
6 In DSR Data Set Ready
7 – SG Signal Ground
11 – +5V DC Reserved
20 Out DTR Data Terminal Ready