KYMCO Downtown 300i ABS, Руководство по обслуживанию, Страница: 84 / 263

7. CYLINDER/PISTON
7-4
Downtown 300i ABS
Inspect the piston, piston pin and piston
rings.
Remove the piston rings.
Clean carbon deposits from the piston
ring grooves.
Install the piston rings onto the piston and
measure the piston ring-to-groove
clearance.
Service Limits :
Top : 0.09 mm replace if over
2nd : 0.09 mm replace if over
Remove the piston rings and insert each
piston ring into the cylinder bottom.
Measure the piston ring end gap.
Service Limit : 0.5mm replace if over
Measure the hole I.D. of piston pin
Service Limit : 15.04 mm replace if over
Take care not to damage or break the
piston rings during removal.
＊
Use the piston head to push each
piston ring into the cylinder.
＊