Kval Commander III, Руководство по эксплуатации

Страница: 48 / 168

About Door Job Creation
2-18
KVAL Manual
The
Door Data
file contains all the raw door information to create a
Door Job
.
A
Door Data
file can be:
• Created directly
• Shared with many
Door Job
files.
• Be pulled in from the
Door Data Library
• Saved to the
Door Data Library
as an ad hoc file, a revised file a or as a new file.
Note:
Definitions of ad hoc and revised files can be found at “Common Terms” on
page 2-45
About the Job Name Menu
Job Name : Job Name is displayed
in the Library page.
Job Description: Add an descrip-
tion of the Door Job
About the Door Data Menu
Door Parameters: Displays the
basic parameters of the door being
processed.
Door Material: Select type of
material of the Face, Hinge side,
and Lock side of the door. (Wood,
Fiber -Glass, or Steel)
Name and Description: Add a file
name and description
Door Hand: Select the Hand Ori-
entation of the Door. From the drip
down menu, select:
• Left Hand’
• Right Hand
• Left Hand’ Reversed
• Right Hand Reversed
FeedRate% Override: Adjust the plunge rate of the drill / routers. Adjusts to door materials. For
example, for a harder material would call for a lower percentage.
Door Core: Clamping pressure will adjust to the selection. (Unspecified, Hollow, or Foam)