Kval Commander III Скачать руководство пользователя страница 60

Страница: 60 / 168

About Backing up Data and Checking the Revision Status

2-30

KVAL Manual

About Backing up Data and Checking the Revision Status

Right Click the KVAL Icon at the bottom of the screen to display this popup.

Note:

Select icon from the windows screen and drag to the favorites bar for access to
this icon.

Build Info:

Select to view upper level notes about

the current build.

Exit:

Select to close the running KvalCAM pro-

gram.

Release Notes:

Select to open a PDF of the his-

tory of release notes on this version o software.

Backup:

Select to save the

to save all data from the

machine operation.

Notes may be added to describe

the saved file.

Licenses:

Select to see all third party licenses.

Kval Docs Website:

Select to go to a see Kval-

CAM documentation (Must have internet connec-
tions)

KvalCAM:

Select to open a close a KvalCAM window.

Close window:

Select to close an open a KvalCAM window.

KvalCAM is still active.

Содержание Commander III









































































































































































Результаты поиска

Содержание Commander III

Отзывы:

Kval Commander III, Руководство по эксплуатации, Страница: 60 / 168

Результаты поиска

Содержание Commander III

Отзывы: