Kval Commander III, Руководство по эксплуатации

Страница: 148 / 168

Operator’s Tour
KVAL Commander III Operation Manual
5-6
Hinge Carriage
The Hinge Carriage is CNC controlled and performs point to point pre-drilling and routs a hinge
pocket on the jamb and the door.
FIGURE 5- 11.
Hinge Carriage Parts
Pre-Drill:
Drills pilot
holes for insertion of screws
on the jamb and the door
Counter Rotate Router:
Routs
the hinge pocket on the jamb. Works
with the Router. The CR Router
routes in the opposite direction of the
Standard Router. Provides a cleaner
cut.
Standard Router:
Routs the hinge pocket
on the jamb and the
door
Chisels:
Squares the
hinge pocket.
Upper chisels process
the pocket on the jamb.
Lower chisels process
the pocket on the door