KUHN ALTOR 6070, Инструкция по эксплуатации

Страница: 55 / 66

55
Check the position of the regulating tines in relation to the sections regularly.
- Outer regulating tines (A): these
tines must be centred in relation to
the sections passing on each side.
- Inner regulating tines (B): the
distance “d” between these tines
and the sections must be less than
10 mm. The non-bevelled side must
be facing the regulating tine to cut
the product correctly.
To adjust the position of the regulating
tines in relation to the sections, add or
remove shims (C) (Ref. A5204400).
For this separating system to work
efficiently, the sections must be sharp:
grind or replace them if necessary.
You can swap the sections around in
order to use both cutting edges of each
section.
5.5 CHECKING AND ADJUSTING THE SECTIONS
A A
B
C
d