KUHN ALTOR 6070, Инструкция по эксплуатации

Страница: 54 / 66

54
5.4 ADJUSTING BELT TENSION
In order to guarantee optimum system operation, belt tension needs to be checked and adjusted if
necessary every 100 hours, or more often if difficult products are frequently distributed.
Belt tension is adjusted using the screw rod (A), nut (B) and check nut (C).
In the engaged position, the end of the spring should be level with the indicator (
I
).
Left-hand side drive (lower feed rotor)
Right-hand side drive (upper feed rotor)
C
A
I
B
I
B
A
C