KUHN ALTOR 6070, Инструкция по эксплуатации

Страница: 41 / 66

41
Select the turbine speed according to the product to be distributed:
- 270 min
-1
for feeding,
- 540 min
-1
for straw blowing.
Note: We strongly recommend against using the machine with a tractor PTO speed of 540 min
-1
in
economic mode.
Always start the tractor PTO before engaging the feed rotor. Similarly,
the feed rotor must be stopped before switching off the PTO. Failure to
comply with this procedure is very likely to lead to turbine jamming.
The chute on the right-hand side of the machine (the “delivery chute”) can be used for two jobs: straw
blowing and feeding. To achieve top quality work and to put the forage where you want it, the tip of this
chute can be set to one of three positions.
- To adjust the position simply by hand, we
recommend opening the chute halfway.
- Take hold of the handle and pull downwards.
- Place the pin in the required notch (the notch
farthest away from the machine body
corresponds to the most inclined tip position).
3.5 FEEDING