KUHN ALTOR 6070, Инструкция по эксплуатации

Страница: 34 / 66

34
2.4.4 Electric
The machine is supplied as standard with a separate harness
to be connected by your dealer to the + and - terminals on
your tractor battery (brown wire to + and blue wire to -).
A second power cable can be ordered for another tractor
under reference A7040170.
The electric power cable must be connected directly to the
battery for a constant, even electric power supply to the
machine’s controls.
Certain tractors are equipped with this type of 3-pole serial plug. To
avoid any malfunctions, the polarity of this plug must be checked.
On mounting the electric power cable, beware of shearing, burning on the exhaust pipe, etc.
Next connect the plug and socket to power the control unit. The electric control unit is fitted with a fuse
(see table) and the tractor-side harness with a 30 A fuse (P/N. A7040926).
2.5 PRELIMINARY TECHNICAL CHECKS
This phase is particularly important for your machine to give you full satisfaction. We recommend that
you check all of the following points on delivery.
-
Check the wheel bolts and tighten up if necessary to 25 daNm.
- Check the conveyor chain tension and adjust if necessary (refer to the Servicing section).
- Check the tightness of the screws and nuts, particularly those holding tools (knives, conveyor bars,
etc.).
- Check that the safety labels are fitted and legible.
- Lubricate all moving parts (refer to the stickers for the location of the greasing nipples). Use only
manufacturer-recommended grease: refer to the lubricant chart.
- Check the oil level in the gearbox.
- Check the oil level in the conveyor drive unit.
- Check the oil level in the hydraulic unit tank and check the condition of the oil filter (optional).
&RQWUROXQLW
MACHINE ATO-type fuse 30A fuse
Harness
reference
ZLWKRXWVZLYHOFKXWH
15A A7040915 A7040926 A7040170
ZLWKVZLYHOFKXWH
20A A7040932 A7040926 A7040170
ZLWKPL[LQJKRSSHU
15A A7040915 B0000560 A7040170
7UDFWRUVLGHKDUQHVV