KUHN ALTOR 6070, Инструкция по эксплуатации

Страница: 59 / 66

59
5.9 SUMMARY MAINTENANCE SCHEDULE
2QHYHU\XVH
$IWHU
KRXUV
$IWHU
KRXUV
(YHU\
KRXUV
(YHU\
KRXUV
$IWHU
KRXUV
(YHU\
KRXUV
(YHU\
KRXUV
(YHU\ KRXUVRU HYHU\\HDU
Check wheel bolt tightness (25 daNm) and
tyre pressure (5.5 bar)
; ;
Check nuts and screws, particularly the
ones fastening the tools (sections)
; ; ;
Tighten drawbar eyebolts
; ;
Check the belt tension
; ;
Grease and check tension of upper feed
rotor drive chain
; ;
Grease arm, grab, axle and regulating
system joints
; ;
Grease grab, axle and arm rams
; ;
Grease the chute ram
; ;
Grease the feed rotor bearings
; ;
Grease the swivel chute bearing (if fitted)
; ;
Grease the conveyor
; ;
Grease the parking stand
; ;
Grease the conveyor rotation indicator
; ;
Change the gearbox oil
; ;
Change the oil in the conveyor reduction
gear unit
; ;
Change the oil in the step-up gear unit on
the hydraulic unit (if fitted)
; ;
Change the oil in the hydraulic unit (if fitted)
; ;
Change the filter cartridge on the hydraulic
unit (if fitted)
; ;
Check the conveyor chain tension
; ;
Check the gearbox level
;
Check the conveyor reduction gear unit
level
;
Check that the safety guards are fitted and
in good condition. Replace if necessary.
;
Check that the safety labels are fitted and
legible
; ;
Check moving parts for wear. Replace if
necessary using original KUHN parts.
; ;
Clean the machine (body, arm and grab).
Avoid splashing electrical components, the
belt, etc.
;