KUHN ALTOR 6070, Инструкция по эксплуатации

Страница: 47 / 66

47
The following options are available for the Altor 6070 and the Athenor 6070:
- Hydraulic unit (*)
- Free wheel homokinetic transmission
- Weighing system (*)
- Swivel chute (*)
- Mixing hopper (*)
Note: Options marked (*) are factory-fitted only.
The hydraulic unit is designed to provide the hydraulic power required for smooth operation of the
machine.
In particular, it enables tractors with a low hydraulic output to be used while guaranteeing optimum
performance of the functions.
Description: - Auxiliary hydraulic unit
- Driven by tractor PTO
- 22 cm
3
pump - output at a PTO speed of 540 min
-1
: 60 l/min.
- 60 litre tank with filter and level gauge
- Circuit protected by valve calibrated to 190 bar
- Recommended oil type: ISO VG 46 (HV); e.g. SHELL HYDRAU PW.
A slight gearing noise may be heard at low speeds. We recommend using
the hydraulic unit at a minimum PTO speed of 300 min
-1
.
Operation:
- Before starting up a machine equipped with a hydraulic unit, check the oil level in the tank.
- Connect and lock the transmission to the tractor PTO and to the pump step-up gear drive shaft.
- The machine must be driven at the nominal PTO speed of 540 min
-1
.
Under no circumstances use the tractor’s 1000 min
-1
PTO.
- Start up the tractor, then gradually engage the PTO to operate the pump.
- Try the various machine controls. Check the pump flanges and the various hydraulic connections
on the unit for leaks.
4. OPTIONS
4.1 HYDRAULIC UNIT