KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 20 / 222

6 FORK, TRIPLE CLAMP
18
201436-10
–
Warm up the outer tube in area
B
of the lower sliding bushings.
Guideline
50 °C (122 °F)
–
Jerk the outer tube out of the inner tube.
Info
The lower sliding bushing
9
must be pulled out of its bearing seat when
doing this.
201437-10
–
Remove the upper sliding bushing
bk
.
Info
Without using a tool, pull the stack apart by hand slightly.
201438-10
–
Take off the lower sliding bushing
9
.
–
Take off support ring
bl
.
–
Take off seal ring
bm
.
–
Take off lock ring
8
.
–
Take off dust boot
7
.
–
Take out the fork leg.
6.11 Disassembling the cartridge
Info
The steps are identical for both fork legs.
Preparatory work
–
Disassemble the fork legs. ( p. 15)
200693-10
Main work
–
Clamp the special tool in a bench vise.
Pin (T605) ( p. 214)
–
Hitch cartridge
1
by using the drilled holes.
200694-10
–
Unscrew and remove screw sleeve
2
.