KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 107 / 222

18 30/ENGINE
105
202716-11
–
Position the brace.
–
Mount screw
3
on both sides but do not tighten yet.
Guideline
Screw, engine brace on
frame M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Mount and tighten fitting
4
.
Guideline
Screw, engine brace on cylinder head M8 33 Nm
(24.3 lbf ft)
–
Tighten screw
3
on both sides.
Guideline
Screw, engine brace on
frame M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Position the wiring harness. Mount cable binders
5
.
–
Mount and tighten spark plug.
Guideline
Spark plug M14x1.25 25 Nm
(18.4 lbf ft)
202714-11
–
Position the engine sprocket.
–
Mount lock ring
6
.
–
Put the chain on the engine sprocket.
202715-11
–
Position the rear wheel.
–
Mount the chain adjuster and nut.
–
Push the rear wheel forward so that the chain adjusters are in contact with the ten-
sioning screws, and tighten nut
7
.
Guideline
Nut, rear wheel spindle M20x1.5 80 Nm (59 lbf ft)
202713-11
–
Position the clutch slave cylinder with the gasket.
–
Mount and tighten screws
8
Guideline
Screw, slave cylinder of the clutch M6 10 Nm (7.4 lbf ft)
–
Position the wiring harness. Mount cable binder
9
.
202712-11
–
Mount the engine sprocket cover.
–
Mount and tighten screw
bk
.
Guideline
Remaining nuts, chassis M8 25 Nm
(18.4 lbf ft)
–
Mount and tighten screw
bl
.
Guideline
Screw, slave cylinder of the clutch M6 10 Nm (7.4 lbf ft)