KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 16 / 222

6 FORK, TRIPLE CLAMP
14
B01734-11
–
Position the fork protection on the left fork leg. Mount and tighten screws
2
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
3
.
6.7 Removing the fork legs
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 67)
–
Raise the motorcycle with the lift stand. ( p. 10)
–
Remove the front wheel. ( p. 71)
602805-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove cable binder
2
.
–
Remove screws
3
and the spacers and take off the brake caliper.
–
Allow the brake caliper and brake line to hang tension-free to the side.
B01054-10
–
Release screws
4
. Take out the left fork leg.
–
Release screws
5
. Take out the right fork leg.
6.8 Installing the fork legs
B01737-10
Main work
–
Position the fork legs.
Info
The upper milled groove in the fork leg must be flush with the upper edge of
the upper triple clamp.
Position bleeder screws
1
toward the front.
B01054-11
–
Tighten screws
2
.
Guideline
Screw, top triple clamp M8 22 Nm
(16.2 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple clamp M8 18 Nm
(13.3 lbf ft)