KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 162 / 222

22 LUBRICATION SYSTEM
160
22.1 Changing the gear oil
400721-01
–
Drain the gear oil. ( p. 160)
400722-01
–
Fill in gear oil. ( p. 161)
22.2 Draining the gear oil
Warning
Danger of scalding
Engine oil and gear oil get very hot when the motorcycle is ridden.
–
Wear appropriate protective clothing and safety gloves. In case of burns, rinse immediately with lukewarm water.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Drain the gear oil while the engine is warm.
Preparatory work
–
Park the motorcycle on a level surface.
–
Place a suitable container under the engine.
B01671-10
Main work
–
Remove the gear oil drain plug with magnet
1
.
–
Let the gear oil drain fully.
–
Thoroughly clean the gear oil drain plug with magnet.
–
Clean the sealing surface on the engine.
–
Mount and tighten gear oil drain plug with magnet
1
and seal ring.
Guideline
Gear oil drain plug with magnet M12x1.5 20 Nm
(14.8 lbf ft)