KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 94 / 222

16 BRAKE SYSTEM
92
B01693-10
–
Stand the vehicle upright.
–
Check the brake fluid level in the viewer
1
.
» If the brake fluid level drops below marking
A
:
–
Add rear brake fluid. ( p. 92)
16.13 Adding rear brake fluid
Warning
Danger of accidents Brake system failure.
–
If the brake fluid level drops below the specified marking or the specified value, this is an indication that the brake system
is leaking or that the brake linings are completely worn down. Check the brake system and do not continue riding.
Warning
Skin irritation Brake fluid can cause skin irritation on contact.
–
Avoid contact with skin and eyes, and keep out of the reach of children.
–
Wear suitable protective clothing and goggles.
–
If brake fluid comes into contact with the eyes, flush the eyes thoroughly with water and consult a physician immediately.
Warning
Danger of accidents Reduced braking efficiency due to old brake fluid.
–
Change the brake fluid of the front and rear brake according to the service schedule.
Warning
Environmental hazard Hazardous substances cause environmental damage.
–
Oil, grease, filters, fuel, cleaners, brake fluid, etc., should be disposed of as stipulated in applicable regulations.
Info
Never use DOT 5 brake fluid! It is silicone-based and purple in color. Oil seals and brake lines are not designed for DOT 5
brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint!
Use only clean brake fluid from a sealed container.
Preparatory work
–
Check the rear brake linings. ( p. 89)
B01692-10
Main work
–
Stand the vehicle upright.
–
Remove screws
1
.
–
Remove cover with membrane
2
.
–
Add brake fluid to level
A
.
Brake fluid DOT 4 / DOT 5.1 ( p. 202)
–
Mount the cover with the membrane.
–
Mount and tighten the screws.
Info
Clean up overflowed or spilt brake fluid immediately with water.