KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 92 / 222

16 BRAKE SYSTEM
90
B01689-10
–
Stand the vehicle upright.
–
Remove screws
1
.
–
Remove cover with membrane
2
.
–
Press the brake piston back to its basic position and make sure that no brake fluid
overflows from the brake fluid reservoir.
B01690-10
–
Take off cotter pin
3
and remove bolt
4
.
–
Take off retaining spring
5
and remove the brake linings.
–
Clean the brake caliper.
B01691-01
–
Position the new brake linings.
Info
Always change the full set of brake linings.
B01690-10
–
Position retaining spring
5
.
–
Mount bolt
4
.
–
Mount cotter pin
3
.
Info
To make it easier to mount the bolt, push the retaining spring down.
Make sure the retaining spring is seated correctly.
–
Operate the foot brake lever repeatedly until the brake linings are in contact with
the brake disc and there is a pressure point.
B01692-10
–
Add brake fluid to level
A
.
Brake fluid DOT 4 / DOT 5.1 ( p. 202)
–
Mount the cover with membrane
2
.
–
Mount and tighten screws
1
.
Info
Clean up overflowed or spilt brake fluid immediately with water.