KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 122 / 222

18 30/ENGINE
120
–
Push the warmed up special tool
2
onto the crankshaft bearing inner race, press
firmly together and pull jointly from the crankshaft.
18.4.4 Installing the crankshaft bearing inner race
303480-10
–
Fixate the crankshaft in the vice with special tool
1
.
Separator plate (54829009000) ( p. 207)
Info
Use soft jaws.
–
Heat the crankshaft bearing inner race in special tool
2
and mount together.
Guideline
120 °C (248 °F)
Tool for inner bearing race (58429037040) ( p. 208)
–
Ensure that the new crankshaft bearing inner race is flush.
18.4.5 Changing the connecting rod, conrod bearing, and crank pin
303485-10
Main work
–
Position crankshaft
1
in the press using special tool
2
.
Separator plate (54829009000) ( p. 207)
–
Press the crank pin out of the upper crank web with a suitable tool.
Info
Hold the lower crankweb.
–
Remove the connecting rod and bearing.
303486-10
–
Press the crank pin out of the lower crankweb.
303331-10
–
Press in the new crank pin
3
as far as possible.
303332-10
–
Mount new bearing
4
with washers
5
and connecting rod
6
.
Info
Thoroughly oil the bearing.