KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 105 / 222

18 30/ENGINE
103
202711-10
–
Remove screws
bt
.
–
Take off the throttle slide cover and pull the throttle slide out of the carburetor.
–
Hang the throttle slide to the side.
Info
Protect the vehicle and its attachments from damage by covering them.
–
Loosen hose clip
ck
.
–
Pull the carburetor out of the intake flange toward the rear and remove it.
202712-10
–
Remove screws
cl
.
–
Remove the engine sprocket cover.
202713-10
–
Remove screws
cm
.
–
Remove cable binder
cn
.
–
Take off the clutch slave cylinder and hang it to the side.
Info
Do not activate the clutch lever if the clutch slave cylinder has been
removed.
202715-10
–
Remove nut
co
. Remove the chain adjuster.
–
Pull out the wheel spindle only far enough to allow the rear wheel to be pushed for-
ward.
–
Push the rear wheel forward as far as possible and take the chain off the rear
sprocket.
Info
Protect the vehicle and its attachments from damage by covering them.
The rear wheel must not be fully removed.
202714-10
–
Remove lock ring
cp
.
–
Take off the engine sprocket.
202716-10
–
Remove screw
cq
on both sides.
–
Remove fitting
cr
.
–
Remove cable binders
cs
.
–
Remove the brace.
–
Remove the spark plug.