KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 41 / 222

9 SHOCK ABSORBER, SWINGARM
39
–
After removing the shock absorber, clean it thoroughly.
401026-10
Main work
–
Loosen screw
1
.
–
Turn adjusting ring
2
until the spring is no longer under tension.
Hook wrench (T106S) ( p. 210)
–
Measure the overall spring length while the spring is not under tension.
–
Tighten the spring by turning adjusting ring
2
to measurement
A
.
Guideline
Spring preload
Comfort 8 mm (0.31 in)
Standard 8 mm (0.31 in)
Sport 8 mm (0.31 in)
Info
Depending on the static sag and/or the riding sag, it may be necessary to
increase or decrease the spring preload.
–
Tighten screw
1
.
Guideline
Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft)
Finishing work
–
Install the shock absorber. ( p. 40)
–
Lock the seat. ( p. 62)
–
Remove the motorcycle from the lift stand. ( p. 10)
9.8 Adjusting the riding sag
Preparatory work
–
Raise the motorcycle with the lift stand. ( p. 10)
–
Fold the seat up. ( p. 62)
–
Remove the shock absorber. ( p. 40)
–
After removing the shock absorber, clean it thoroughly.
B00292-10
Main work
–
Choose and mount a suitable spring.
Guideline
Spring designation
Weight of rider: 65… 75 kg (143…
165 lb.) (61/59) 55-215
Weight of rider: 75… 85 kg (165…
187 lb.) (61/59) 55/63/71-215
Weight of rider: 85… 95 kg (187…
209 lb.) (61/59) 58/62/74-215
Info
The spring rate is shown on the outside of the spring.
Smaller weight differences can be compensated by changing the spring
preload.
Finishing work
–
Install the shock absorber. ( p. 40)
–
Lock the seat. ( p. 62)
–
Remove the motorcycle from the lift stand. ( p. 10)
–
Check the static sag of the shock absorber. ( p. 38)
–
Check the riding sag of the shock absorber. ( p. 38)
–
Adjust the rebound damping of the shock absorber. ( p. 37)