KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 17 / 222

6 FORK, TRIPLE CLAMP
15
602805-11
–
Position the brake caliper. Mount and tighten screws
4
with the spacers.
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft) Loctite ® 243™
–
Mount cable binder
5
.
–
Position the brake line, wiring harness, and clamp. Mount and tighten screws
6
.
Finishing work
–
Install the front wheel. ( p. 71)
–
Refit the headlight mask with the headlight. ( p. 68)
–
Check the headlight setting. ( p. 97)
6.9 Performing a fork service
Condition
The fork legs have been removed.
201467-01
–
Disassemble the fork legs. ( p. 15)
–
Disassemble the cartridge. ( p. 18)
–
Disassemble the compression holder. ( p. 20)
–
Check the fork legs. ( p. 20)
–
Assemble the compression holder. ( p. 22)
–
Assemble the cartridge. ( p. 22)
–
Assemble the fork legs. ( p. 24)
6.10 Disassembling the fork legs
Info
The operations are the same on both fork legs.
Condition
The fork legs have been removed.
201423-10
–
Remove protection cap
A
.
–
Note down the present state of rebound damping
1
and compression damping
2
.
–
Completely open the adjusters of the rebound damping and compression damping.