KTM Freeride 250 R AUS 2014, Руководство по ремонту

Страница: 24 / 222

6 FORK, TRIPLE CLAMP
22
6.14 Assembling the compression holder
Info
The steps are identical for both fork legs.
200704-11
–
Clamp the compression holder in a bench vise using soft jaws.
–
Mount O-ring
1
and seal ring
2
.
–
Grease the O-ring.
Lubricant (T158) ( p. 204)
200705-10
–
Mount shim stack
3
with the smaller shims facing downward.
–
Mount piston
4
with O-ring
A
.
Info
The side with the larger inside diameter
B
faces up.
–
Grease the piston O-ring.
Fork oil (SAE 4) (48601166S1) ( p. 202)
200706-10
–
Mount washer
5
.
–
Mount spring
6
with the tighter coil facing downward.
–
Mount and tighten nut
7
.
Guideline
Nut, compression holder M6x0.5 3 Nm (2.2 lbf ft)
Info
Washer
5
must be free to move against the spring force.
–
Secure the nut by locking.
–
Extract the compression holder.
6.15 Assembling the cartridge
Info
The steps are identical for both fork legs.
200715-10
–
Clamp in the piston rod.
Clamping stand (T14016S) ( p. 211)
–
Mount valve
1
of the rebound damping, with the spring and O-ring.
–
Grease the O-ring.
Lubricant (T158) ( p. 204)
–
Mount spring
2
.