KTM 2011 690 SMC AUS, Руководство по ремонту

Страница: 143 / 229

16 ENGINE
141
16.4.39 Checking the starter drive
5 5
6 6
1 1
2 2
4 4
3 3
300129-01
–
Check the teeth and seating of the starter idler gear
1
for damage and wear.
» If there is damage or wear:
–
Replace the starter idler gear and/or needle bushing.
–
Check the teeth and seating of the torque limiter
2
for damage and wear.
» If there is damage or wear:
–
Replace the torque limiter and/or needle bushing.
–
Check freewheel gear
3
and bearing when removed for damage and wear.
» If there is damage or wear:
–
Replace the freewheel gear and/or the bearing.
–
Check freewheel
4
when removed for damage and wear.
» If there is damage or wear:
–
Replace the freewheel.
–
Check the toothing of the starter motor
5
for damage and wear.
» If there is damage or wear:
–
Replace the starter motor.
–
Clamp the minus (negative) cable of a 12 Volt power supply to the starter motor housing. Briefly connect the plus (positive) cable
of the power supply to the starter motor connection.
» If the starter motor does not turn when you close the power circuit:
–
Replace the starter motor.
–
Replace the O-ring
6
of the starter motor.
16.4.40 Removing freewheel
300127-10
–
Extract the lock ring
1
from the groove using suitable pliers.