KTM 2011 690 SMC AUS, Руководство по ремонту

Страница: 114 / 229

16 ENGINE
112
16.3.20 Removing timing chain rails
300045-10
–
Remove screws
1
.
–
Pull the timing chain guide rails
2
out of the timing chain securing guide
3
.
Info
The support bushing is plugged through the timing chain guide rails into the
timing chain securing guide.
–
Remove the timing chain guide rails upward out of the timing chain shaft.
300046-10
–
Hold the timing chain securing guide tight and pull the timing chain tensioning
rail
4
out of the timing chain securing guide.
–
Remove the timing chain tensioning rail upward out of the timing chain shaft.
–
Remove the timing chain securing guide
3
.
16.3.21 Removing timing chain and timing chain sprocket
300148-10
–
Slip out timing chain
1
.
Info
Mark the direction of travel.
–
Take off lock ring.
300149-10
–
Pull of the timing chain sprocket with the special tool
2
.
Extractor (59029033000) ( p. 211)
16.3.22 Removing crankshaft position sensor
300151-10
–
Remove the screws of crankshaft position sensor
1
.
–
Pull cable support sleeve
2
out of the engine case. Take off the crankshaft posi-
tion sensor.