manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 99

 

Settings

 

99 

 

Pos: 40.12.1 /Überschriften/Überschriften 2/A-E/EEinstellbare Drosseln @ 0\mod_1197295892260_78.docx @ 17199 @ 2 @ 1 

 

11.3 Adjustable 

throttles 

 

Pos: 40.12.2 /BA/Sicherheit/7. Gefahrenhinweise alt/Einstellarbeiten / EinstellungenWarnung- Einstellarbeiten Maschinen @ 297\mod_1412757509120_78.docx @ 2333197 @  @ 1 

 

 

WARNING!

 

 

When performing repair, maintenance or cleaning work on the machine, or in case of 
technical intervention, drive elements may start moving.

 

Thus there is a risk of serious 

injuries or death. 

• 

Switch off tractor engine, remove the ignition key and carry it with you. 

• 

Secure the tractor against accidental start-up and against rolling. 

• 

Wait until all machine parts have come to a complete stop and have been cooled down 
completely. 

 

Pos: 40.12.3 /BA/Einstellungen/Drossel/Drosseln einstellen allgemeiner Text SW 807_810_907 @ 16\mod_1234866857148_78.docx @ 197079 @  @ 1 

 

You can use the adjustable throttles to adjust the lowering speeds 

of the rotors on the machine. 

The throttles are set in the factory so that the rotor is lowered into the headland position or out 
of the headland position into the working position with a 

time delay (front, rear)

. 

To allow for different types of tractors and oil pressures, the throttles may need to be 
readjusted. 
 

Pos: 40.12.4 /BA/Einstellungen/Drossel/Hinweis Einstellung an den Drosseln (Auswirkung) @ 7\mod_1215525223776_78.docx @ 103417 @  @ 1 

 

 

Note 

Adjustment on the throttles 

Even the smallest adjustments to the stud bolts or throttle setting screws may significantly 
change the lifting and lowering speed.

 

 

Pos: 40.12.5 /BA/Einstellungen/Drossel/Hinweis Sechskantmutter/Imbusschraube kontern @ 7\mod_1215525389308_78.docx @ 103437 @  @ 1 

 

 

Note 

Adjustment on the throttles 

After an adjustment has been made to the throttles, lock the hexagonal nuts and Allen head 
screw. Then test functionality.

 

 

Pos: 40.12.6 /BA/Einstellungen/Drossel/Drossel Bild (3) Swadro TS 620 (Twin)_TS 680 (Twin)_TS 740 (Twin) @ 244\mod_1395766012759_78.docx @ 1909191 @  @ 1 

 

SW9070068_1

3

c/d

2

 

Fig. 57 

Pos: 40.12.7 /BA/Einstellungen/Drossel/Drossel (2) vorderer Kreisel @ 7\mod_1215523502964_78.docx @ 103357 @  @ 1 

Throttle (2) 

Lowering speed of the front rotor. 
• 

Loosen hexagonal socket head screw (c). 

• 

Screw stud screw (d) in or out (unscrewing it increases the flow of oil and thus increases the 
speed at which the front rotor is lowered.) 

Pos: 40.12.8 /BA/Einstellungen/Drossel/Drossel (3) hinterer Kreisel @ 7\mod_1215523600901_78.docx @ 103377 @  @ 1 

 

Throttle (3) 

Lowering speed of the rear rotor. 
• 

Loosen hexagonal socket head screw (c). 

• 

Screw stud screw (d) in or out (unscrewing it increases the flow of oil and thus increases the 
speed at which the rear rotor is lowered.) 

Pos: 40.13 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды