manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 71

 

Driving and Transport

 

71 

 

Pos: 36.12 /BA/Bedienung /Schwader/Fahren im Hangbereich_Schwader @ 306\mod_1416229335569_78.docx @ 2379826 @ 2 @ 1 

 

9.2 

Driving on Slopes  

 

WARNING! 

Travelling on an incline 
As long as the machine is used transverse to slope and the outrigger arms are folded in or 
folded down, the machine may tilt. Thus there is a risk of serious injuries or death. 
• 

Never move the outrigger arms from working position to transport position or from transport 
position to working position as long as the machine is positioned across an incline. 

 

KS102325

Fig. 34 
 

Pos: 36.13 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 36.14 /Überschriften/Überschriften 2/U-Z/ZZinkenschutze anbringen @ 36\mod_1263218287043_78.docx @ 338452 @ 2 @ 1 

 

9.3 

Protecting the tine tips (transport position and rotary rake switched off)  

Pos: 36.15 /BA/Bedienung /Schwader/Zinken / Zinkenarme/Zinkenschutze anbringen Bild SW 807-1 bis 810-1, 850 @ 149\mod_1361447911704_78.docx @ 1330163 @  @ 1 

 

1

SW9070061

1

Fig. 35 

Pos: 36.16 /BA/Bedienung /Schwader/Zinken / Zinkenarme/Zinken unter 2 m  mit  Zinkenschutze sichern Text_807-1 bis 810-1, 850, 907-1 @ 149\mod_1361449591007_78.docx @ 1330282 @  @ 1 

 

The tines must be fitted with tine guard that is lower than 2 m in transport position or when 
parking the machine. The tine guards are located on the front support (left-hand side of the 
machine). 
• 

Raise the rotor arms into transport position. 

• 

Turn off the tractor and secure it against the possibility of rolling back. 

• 

Insert the tine guards (1) onto the tines. 

• 

Repeat this process for the other machine side. 

Pos: 36.17 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды