manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 94

Settings

 

 

94 

 

Pos: 40.6.5.1 /Überschriften/Überschriften 3/A-E/BBei Ausführung "Nachlaufende Tasträder" @ 427\mod_1455009765507_78.docx @ 2957230 @ 3 @ 1 

 

11.1.2 

For the “Trailing Guide Wheels” Version 

Pos: 40.6.5.2 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselfahrwerk Bild nachlaufendes Rad Swadro TC 680_TC 760_TS 620_TS 680 @ 247\mod_1396423997182_78.docx @ 1925374 @  @ 1 

 

I

II

SW700091_1

3

1

2

III

 

Fig. 54 

Pos: 40.6.5.3 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 40.6.5.4 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselfahrwerk Längsneigung_nachlaufendes Rad_Mittel- und Seitenschwader  @ 247\mod_1396366697765_78.docx @ 1924247 @  @ 1 

 

Longitudinal inclination: 

The longitudinal inclination can be changed (rotor tips forward) by reconnecting the rear guide 
wheels (right and left) of the chassis in positions I, II and III. 

Pos: 40.6.5.5 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 40.6.5.6 /BA/Einstellungen/Schwader/KreiselfahrwerkKreiselneigung einstellen Text Position_äußeres Tandemfahrwerk @ 466\mod_1467970075772_78.docx @ 3140777 @  @ 1 

 

Pos. I   = reduce rotor inclination 
Pos. II  = increase rotor inclination 
 

Pos: 40.6.5.7 /BA/Einstellungen/Schwader/KreiselfahrwerkKreiselfahrwerk Vorgehensweise Swadro diverse TC und TS @ 427\mod_1455032842030_78.docx @ 2959284 @  @ 1 

 

Do not step under the raised rotors. 

• 

Only raise the outrigger arms as far as necessary to perform the changeover work. 

• 

To set rotor inclination, dismount the rear guide wheels and move them in the hole pattern. 
For better orientation, observe the basic setting of rotor inclination, refer to chapter Initial 
Operation, “Rotor Inclination - Basic Setting”. 

Pos: 40.6.5.8 /BA/Einstellungen/Schwader/Kreiselfahrwerk/Kreiselfahrwerk Querneigung_TS 620 (Twin)_TS 680 (Twin)_TS 740 (Twin) @ 247\mod_1396366300182_78.docx @ 1924218 @  @ 1 

 

Transverse inclination: 

A change of the transverse inclination (to the direction of travel) is reached if one of the rear 
guide wheels is set higher or deeper compared to the other guide wheel. 

Pos: 40.6.5.9 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 40.6.5.10 /BA/Einstellungen/Schwader/KreiselfahrwerkKreiselfahrwerk Vorgehensweise Swadro diverse TC und TS @ 427\mod_1455032842030_78.docx @ 2959284 @  @ 1 

 

Do not step under the raised rotors. 

• 

Only raise the outrigger arms as far as necessary to perform the changeover work. 

• 

To set rotor inclination, dismount the rear guide wheels and move them in the hole pattern. 
For better orientation, observe the basic setting of rotor inclination, refer to chapter Initial 
Operation, “Rotor Inclination - Basic Setting”. 

Pos: 40.6.5.11 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды