manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 14

Safety

 

 

14 

 

Pos: 18.7.15 /Überschriften/Überschriften 3/U-Z/Zusatzausrüstungen und Ersatzteile @ 187\mod_1380012000801_78.docx @ 1606819 @ 3 @ 1 

 

 

3.3.6 Additional 

equipment and spare parts  

Pos: 18.7.16 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseZusatzausrüstungen und Ersatzteile_fuer alle @ 453\mod_1463988536645_78.docx @ 3077246 @  @ 1 

 

Additional equipment and spare parts which do not comply with the requirements of the 
manufacturer may impair the operational safety of the machine and cause accidents. 
• 

To ensure operational safety, use original parts or standard parts which correspond to the 
requirements of the manufacturer. 

 

Pos: 18.7.17 /Überschriften/Überschriften 3/A-E/AArbeitsplätze an der Maschine @ 453\mod_1463988634725_78.docx @ 3077278 @ 3 @ 1 

 

3.3.7 

Workstations on the Machine  

Pos: 18.7.18 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Arbeitsplätze - Kontrolle über die  fahrende Maschine_Selbstfahrer @ 176\mod_1372850001832_78.docx @ 1506413 @  @ 1 

 

Control of the moving machine 

The moving machine requires the driver to react quickly at any time. Otherwise, the machine 
may move in an uncontrolled manner and seriously injure or kill people. 
• 

Start the engine from the driver's seat only. 

• 

Never leave the driver's seat while the machine is moving. 

• 

Never climb in or out of the machine while it is moving. 

 

Pos: 18.7.19 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Arbeitsplätze - Mitfahrende Personen_fuer alle @ 176\mod_1372850186689_78.docx @ 1506442 @  @ 1 

 

Passengers 

Passengers may be seriously injured by the machine or fall off the machine and get run over. 
Ejected objects may strike and injure passengers. 
• 

Never let people ride on the machine. 

 

Pos: 18.7.20 /Überschriften/Überschriften 3/A-E/B/Betriebssicherheit: Technisch einwandfreier Zustand @ 187\mod_1380012216128_78.docx @ 1606877 @ 3 @ 1 

 

3.3.8 

Operational safety: Technically perfect condition 

Pos: 18.7.21 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Betriebssicherheit - Betrieb nur nach ordnungsgemäßer Inbetriebnahme_fuer alle @ 176\mod_1372854464728_78.docx @ 1506530 @  @ 1 

 

Operation only when the machine has been started up correctly 

If the machine is not started up correctly according to these operating instructions, the 
operational safety of the machine is not ensured. As a result, accidents may occur and people 
may be seriously injured or killed. 
• 

Do not use the machine unless it has been started up correctly, see chapter Start-up. 

 

Pos: 18.7.22 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Betriebssicherheit - Technisch einwandfreier Zustand der Maschine_fuer alle @ 176\mod_1372854718958_78.docx @ 1506559 @  @ 1 

 

Technically perfect condition of the machine 

Improper maintenance and adjustment may affect the operational safety of the machine and 
cause accidents. As a result, people may be seriously injured or killed. 
• 

Perform all maintenance and adjustment work according to the chapters Maintenance and 
Adjustment. 

• 

Before performing any maintenance or adjustment work, shut down and safeguard the 
machine, see chapter Safety "Shutting down and safeguarding the machine". 

 

Pos: 18.7.23 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды