manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 21

 

Safety

 

21 

 

Pos: 18.7.57 /Überschriften/Überschriften 3/F-J/GGefahrenquellen an der Maschine @ 187\mod_1380022841201_78.docx @ 1607417 @ 3 @ 1 

 

3.3.16 

Sources of danger on the machine  

Pos: 18.7.58 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenquellen - Lärm (Traktor und Maschine) Verweis auf Technische Daten @ 321\mod_1424859929013_78.docx @ 2481250 @  @ 1 

 

Noise may lead to health problems 

When working with the machine for a longer time, serious health damage may result such as 
hearing loss, deafness or tinnitus. When using the machine at high speed, the noise level 
increases as well. 
• 

Before starting up the combination of tractor and machine, evaluate the danger by noise. 
Determine and use hearing protection that is suitable depending on environmental 
conditions, working hours as well as working conditions and operating conditions of the 
machine. In this process, observe sound pressure level, refer to chapter Technical Data. 

• 

Define rules for the utilization of hearing protection and for working time. 

• 

When the machine is in operation, keep windows and doors of the cab closed. 

• 

Remove hearing protection for road travel. 

 

Pos: 18.7.59 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Gefahrenquellen - Flüssigkeiten unter Druck -nur Hydrauliköl @ 244\mod_1395751930792_78.docx @ 1906831 @  @ 1 

 

Liquids under pressure 

The following liquids are under high pressure: 
– Hydraulic 

oil 

Liquids under high pressure may penetrate the body through the skin and cause serious 
injuries. 
• 

If a damaged pressure system is suspected, immediately contact a qualified service centre. 

• 

Never search for leaks with bare hands. Even a pin-sized hole may cause serious injuries. 

• 

Keep body and face away from leaks. 

• 

If liquids penetrate the body, immediately consult a doctor. The liquid must be removed from 
the body as quickly as possible. Danger of infection! 

 

Pos: 18.7.60 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseGefahrenquellen - Heiße Flüssigkeiten_fuer alle @ 454\mod_1464170610909_78.docx @ 3083502 @  @ 1 

 

Hot liquids 

If hot liquids are drained, people may burn and/or scald themselves. 
• 

When draining hot consumables, wear personal protective equipment. 

• 

If required, leave liquids and machine parts to cool down before performing repair, 
maintenance and cleaning work. 

 

Pos: 18.7.61 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseGefahrenquellen - Giftige Abgase_Selbstfahrer @ 454\mod_1464170986546_78.docx @ 3083564 @  @ 1 

 

Toxic exhaust gases 

Exhaust gases may seriously damage your health or be fatal. 
• 

While the engine is running, provide adequate ventilation to prevent prolonged exposure to 
exhaust gases.  

• 

Do not leave the engine running in a closed room unless there is a suitable exhaust gas 
extraction system. 

 

Pos: 18.7.62 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды