manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 88

Operation

 

 

88 

 

Pos: 38.41 /Überschriften/Überschriften 3/A-E/B/Bei Ausführung Zinkenarm klappbar @ 77\mod_1310050676669_78.docx @ 667550 @ 3 @ 1 

 

10.12.2 

For design with collapsible tine arm 

Pos: 38.42 /BA/Bedienung /Schwader/Zinken / Zinkenarme/Zinkenarme in Transportstellung schwenken TC 680_760 und TS-Maschinen @ 365\mod_1441010465265_78.docx @ 2685765 @  @ 1 

 

3

2

SW9070080

1

2

1

 

Fig. 50 

At first: 

• 

Turn the left rotor far enough so that the folding tine arms are extended outwardly. 

• 

Pull linch pin (1). 

• 

Pull out bolt (2). 

• 

Swivel tine arms (3) to transport position; when turning the rotor, ensure that the swivelling 
tine arms do not collide with the guard. 

• 

Insert bolt (2) and secure with linch pin (1). 

• 

To prevent the rotors from turning, unhook the tension spring (4) from the fastening hole (5) 
and hook it on the tine (6) (rotor locking device, if necessary). 

Then: 

• 

Turn the right rotor far enough in the working direction until the folding tine arms are 
extended outwardly, as well. 

• 

Pull linch pin (1). 

• 

Pull out bolts (2). 

• 

Swivel tine arms (3) to transport position; when turning the rotor, ensure that the swivelling 
tine arms do not collide with the guard. 

• 

Insert bolt (2) and secure with linch pin (1). 

• 

To prevent the rotors from turning, unhook the tension spring (4) from the fastening hole (5) 
and hook it on the tine (6) (rotor locking device, if necessary). 

 

 

Note 

Check whether the folding tine arms (3) of both rotors are extended outwards. If necessary, 
move the rotors to the correct position. 

 

 

Note 

Swivel the right folding tine arms on the machine side in sequence from the front backwards 
and the left folding tine arms on the machine side in sequence from the back forwards to the 
transport position. 

 

Pos: 38.43 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды