manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 64

Start-up

 

 

64 

 

Pos: 34.30 /Überschriften/Überschriften 2/F-J/HHydraulikleitungen anschließen @ 278\mod_1404991376548_78.docx @ 2084545 @ 2 @ 1 

 

8.5 

Connecting the hydraulic lines  

Pos: 34.31 /BA/Sicherheit/Hydraulik/WARNUNG - Vertauschen der Hydraulikkleitungen, wenn DW @ 168\mod_1368508723414_78.docx @ 1456727 @  @ 1 

 

 

WARNING! - If the hydraulic hoses are interchanged when connecting them to the 
hydraulic system of the tractor, the functions will be interchanged as well. 

Effect: Injuries, serious damage to the machine 
• 

Identify the hydraulic connections. 

• 

Always ensure correct connection between the machine and the tractor. 

• 

When connecting and removing the hydraulic hoses to and from the tractor hydraulics take 
care that the hydraulics are pressureless both on the tractor side and the machine side. 

 

Pos: 34.32 /BA/Sicherheit/Hydraulik/Achtung - Verschmutzung der Hydraulikanlage @ 2\mod_1202393336803_78.docx @ 59155 @  @ 1 

 

 

Caution! - Soiling of the hydraulic system 

Effect: Damages to the machine 
• 

When connecting the quick couplings, ensure that these are clean and dry. 

• 

Note chafing areas or points of contact. 

 

Pos: 34.33 /Layout Module /----------------Leerzeile 5 Pt.-------------------- @ 120\mod_1342592918145_0.docx @ 1092566 @  @ 1 

 

 

Pos: 34.34 /BA/Inbetriebnahme/Schwader/Hydraulikanschluss/Hydraulikanschluss Bild Swadro TS 620 (Twin), TS 680 (Twin), TS 740 (Twin) @ 234\mod_1394090982316_78.docx @ 1865535 @  @ 1 

 

SW9070003_1

Fig. 28 

Pos: 34.35 /Abkürzungen /Abkürzungen sprachneutral/Schwader/Swadro TS 620 / Swadro TS 680 / Swadro TS 740 @ 234\mod_1394089165528_0.docx @ 1864831 @  @ 1 

 

Swadro TS 620 / Swadro TS 680 / Swadro TS 740 

Pos: 34.36 /BA/Inbetriebnahme/Hydraulikkupplungen anschließen alle Maschinen/Hydraulikkupplungen anschließen Teil1 @ 213\mod_1390207328923_78.docx @ 1749237 @  @ 1 

 

• 

Set the single-action control units of the tractor to float position. 

• 

Turn off the tractor and secure it against the possibility of rolling back. 

Pos: 34.37 /BA/Inbetriebnahme/Hydraulikkupplungen anschließen alle Maschinen/Hydraulikkupplungen anschließen rot 1+ @ 213\mod_1390207396349_78.docx @ 1749335 @  @ 1 

 

• 

Connect the hydraulic coupling (red 1+) of the machine to a single-action control unit of the 
tractor. 

Pos: 34.38 /Abkürzungen /Abkürzungen sprachneutral/Schwader/Swadro TS 620 Twin / Swadro TS 680 Twin / Swadro TS 740 Twin @ 234\mod_1394089318863_0.docx @ 1864890 @  @ 1 

 

Swadro TS 620 Twin / Swadro TS 680 Twin / Swadro TS 740 Twin 

Pos: 34.39 /BA/Inbetriebnahme/Hydraulikkupplungen anschließen alle Maschinen/Hydraulikkupplungen anschließen Teil1 @ 213\mod_1390207328923_78.docx @ 1749237 @  @ 1 

 

• 

Set the single-action control units of the tractor to float position. 

• 

Turn off the tractor and secure it against the possibility of rolling back. 

Pos: 34.40 /BA/Inbetriebnahme/Hydraulikkupplungen anschließen alle Maschinen/Hydraulikkupplungen anschließen rot 1+ @ 213\mod_1390207396349_78.docx @ 1749335 @  @ 1 

 

• 

Connect the hydraulic coupling (red 1+) of the machine to a single-action control unit of the 
tractor. 

Pos: 34.41 /BA/Inbetriebnahme/Hydraulikkupplungen anschließen alle MaschinenHydraulikkupplungen anschließen blau 2+/2- @ 213\mod_1390207385983_78.docx @ 1749306 @  @ 1 

 

• 

Connect the hydraulic couplings (blue 2+ / blue 2-) of the machine to a double-action control 
unit of the tractor. 

Pos: 34.42 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды