manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 13

 

Safety

 

13 

 

Pos: 18.7.6 /Überschriften/Überschriften 3/P-T/PPersonalqualifikation @ 187\mod_1380011550253_78.docx @ 1606703 @ 3 @ 1 

 

3.3.2 Personnel 

qualification 

 

Pos: 18.7.7 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Personalqualifikation_BA_fuer alle @ 176\mod_1372840611484_78.docx @ 1505639 @  @ 1 

 

If the machine is not used properly, people may be seriously injured or killed. To avoid 
accidents, each person who works with the machine must satisfy the following minimum 
requirements: 
– 

He is physically capable of controlling the machine. 

– 

He can work safely with the machine in accordance with these operating instructions. 

– 

He understands the method of operation of the machine within the scope of his work and 
can identify and avoid the dangers associated with the work. 

– 

He has read the operating instructions and can implement the information in the operating 
instructions accordingly. 

– 

He is familiar with driving vehicles safely. 

– 

For road travel he has adequate knowledge of the highway code and has the stipulated 
driving licence. 

 

Pos: 18.7.8 /Überschriften/Überschriften 3/K-O/KKinder in Gefahr @ 187\mod_1380011650765_78.docx @ 1606732 @ 3 @ 1 

 

3.3.3 

Children in danger  

Pos: 18.7.9 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Kinder in Gefahr_angebaute und angehängte Maschinen @ 176\mod_1372842540941_78.docx @ 1505758 @  @ 1 

 

Children cannot assess danger and behave unpredictably. 
As a result, children are especially at risk. 
• 

Keep children away from the machine. 

• 

Keep children away from consumables. 

• 

Especially before starting up and moving the machine, ensure that there are no children in 
the danger zone. 

 

Pos: 18.7.10 /Überschriften/Überschriften 3/A-E/A/Ankuppeln @ 12\mod_1224678928406_78.docx @ 152806 @ 3 @ 1 

 

3.3.4 Coupling 

Pos: 18.7.11 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseMaschine sicher ankuppeln_angebaute und angehängte Maschinen_ohne Vorsätze @ 455\mod_1464250456943_78.docx @ 3084986 @  @ 1 

 

When tractor and machine are not correctly connected, there is a risk of causing serious 
accidents. 
• 

Observe all operating instructions when connecting: 
– 

The operating instructions of the tractor 

– 

The operating instructions of the machine 

– 

The operating instructions of universal shaft 

• 

Observe the changed driving behaviour of the combination. 

 

Pos: 18.7.12 /Überschriften/Überschriften 3/A-E/B/Bauliche Änderungen an der Maschine @ 187\mod_1380011874486_78.docx @ 1606786 @ 3 @ 1 

 

3.3.5 

Structural changes to the machine  

Pos: 18.7.13 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseBauliche Änderungen an der Maschine_fuer alle @ 453\mod_1463988143077_78.docx @ 3077215 @  @ 1 

 

Structural changes and enhancements may impair the functionality and operational safety of the 
machine. Thus there is a risk of serious injuries or death. 
Structural changes and enhancements are not permitted. 
 

Pos: 18.7.14 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды