manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 20

Safety

 

 

20 

 

Pos: 18.7.50 /Überschriften/Überschriften 3/K-O/MMaschine sicher abstellen @ 187\mod_1380021652951_78.docx @ 1607221 @ 3 @ 1 

 

3.3.14 

Parking the machine safely  

Pos: 18.7.51 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseMaschine sicher abstellen_fuer alle außer RP Solo und PreChop @ 476\mod_1473317327143_78.docx @ 3214793 @  @ 1 

 

An improperly parked machine may move uncontrollably or overturn. As a result, people may be 
crushed or killed. 
• 

Park the machine on horizontal and level ground capable of bearing the load. 

• 

Before adjusting, repairing, servicing and cleaning the machine, ensure that it is securely 
positioned. 

• 

Observe section “Parking the Machine” in chapter Driving and Transport. 

 

Pos: 18.7.52 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Maschine sicher abstellen - Unbeaufsichtigtes abstellen (Anbaugerät) @ 271\mod_1402650087789_78.docx @ 2043151 @  @ 1 

 

Unattended parking 

Adults and playing children are at risk from an inadequately secured and unattended parked 
machine. 
•  Before switching off the machine: Shut down and safeguard the machine, see chapter 
Safety, "Shutting down and safeguarding the machine". 
 

Pos: 18.7.53 /Überschriften/Überschriften 3/A-E/B/Betriebsstoffe @ 187\mod_1380021996500_78.docx @ 1607250 @ 3 @ 1 

 

3.3.15 Consumables 

Pos: 18.7.54 /BA/Sicherheit/1. Grundlegende Sicherheitshinweise/Betriebsstoffe - Ungeeignete Betriebsstoffe Verweis auf Technische Daten @ 321\mod_1424858173088_78.docx @ 2481119 @  @ 1 

 

Unsuitable operating materials 

Operating materials that do not correspond to the requirements of the manufacturer may impair 
the operational safety of the machine and cause accidents. 
• 

Only use operating materials which meet the requirements. 

For information on requirements relative to operating materials, refer to chapter Technical Data, 
“Operating Materials”. 
 

Pos: 18.7.55 /BA/Sicherheit/1. Grundlegende SicherheitshinweiseBetriebsstoffe - Umweltschutz und Entsorgung_fuer alle @ 454\mod_1464155176116_78.docx @ 3082356 @  @ 1 

 

Environmental protection and disposal 

Consumables such as diesel fuel, brake fluid, frost protection agent and lubricants (e. g. 
gearbox oil, hydraulic oil) may damage the environment and the health of people. 
• 

Do not release consumables into the environment. 

• 

Fill consumables in a liquid-tight labelled container and dispose of according to the official 
regulations. 

• 

Absorb leaked consumables with an absorbent material, fill them in a liquid-tight labelled 
container and dispose of them according to the official regulations. 

 

Pos: 18.7.56 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды