manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 67

 

Start-up

 

67 

 

Pos: 34.54.1 /Überschriften/Überschriften 2/P-T/SSicherungskette verwenden @ 6\mod_1214542336632_78.docx @ 94799 @ 2 @ 1 

 

8.9 

Using the safety chain  

Pos: 34.54.2 /BA/Inbetriebnahme/Sicherungskette USA/WARNUNG - Falsch dimensionierte Sicherungskette verwendet mit Variante @ 180\mod_1376576652355_78.docx @ 1547873 @  @ 1 

 

 

WARNING! 
When using a wrongly dimensioned safety chain, the safety chain may tear if the 
machine loosens unintentionally. This can result in serious accidents. 

• 

Always use a safety chain with a minimum tensile strength of 89 kN (20.000 lbf). 

 

Pos: 34.54.3 /BA/Inbetriebnahme/Sicherungskette USA/WARNUNG - Zu straff oder zu locker verlegte Sicherungskette @ 226\mod_1392652264306_78.docx @ 1824606 @  @ 1 

 

 

WARNING! 
If the safety chain is layed so that it is too tight or too loose, then it may tear. As a result, 
serious injuries or damage to tractor and machine may be caused. 

• 

Position the safety chain so that it does not tension when cornering. Also make sure when 
laying it that it does not touch the tractor wheels or other parts of tractor or machine. 

 

Pos: 34.54.4 /BA/Inbetriebnahme/Sicherungskette USA/Hinweis Sicherungskette Länderabhängig @ 6\mod_1214999654856_78.docx @ 97933 @  @ 1 

 

 

Note 

Using the safety chain 
Attachment of the safety chain is not stipulated in all countries. 

 

Pos: 34.54.5 /BA/Sicherheit/8. Voraussetzungen/Handlungsanweisung für alle Maschinen/Handlungsanweisung: Maschine stillsetzen und sichern @ 274\mod_1404365253849_78.docx @ 2065151 @  @ 1 

 

• 

Shut down and safeguard the machine, see chapter Safety -> Safety routines, "Shutting 
down and safeguarding the machine". 

Pos: 34.54.6 /BA/Inbetriebnahme/Sicherungskette USA/Sicherungskette verwenden @ 207\mod_1386742973026_78.docx @ 1714836 @  @ 1 

 

The safety chain is used as an additional safety precaution for trailed devices, should they 
become detached from the drawbar during transport. Attach the safety chain with the respective 
mounting parts to the hitching device on the tractor or to another specified connection point. The 
safety chain should have just enough play to be able to go around curves.  

Pos: 34.54.7 /Beipacks/Sonstige Beipacks_maschinenuebergreifend/Sicherungskette 89kNSicherungskette am Traktor montieren Mäher,Schwader,Wender Bild @ 430\mod_1455546854707_78.docx @ 2969383 @  @ 1 

 

ZBBP0899_2

I

II

Fig. 31 

Pos: 34.54.8 /Beipacks/Sonstige Beipacks_maschinenuebergreifend/Sicherungskette 89kN/Sicherungskette am Traktor montieren Text @ 449\mod_1461735446904_78.docx @ 3054077 @  @ 1 

 

• 

Install safety chain (1) on an eligible position (for example: I or II) on the tractor. 

 

Pos: 34.54.9 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды