manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 24

Safety

 

 

24 

 

Pos: 18.9.1 /Überschriften/Überschriften 2/P-T/SSicherheitsroutinen @ 187\mod_1380089318480_78.docx @ 1608182 @ 2 @ 1 

 

3.4 

Safety routines  

Pos: 18.9.2 /Überschriften/Überschriften 3/K-O/MMaschine stillsetzen und sichern @ 190\mod_1381323544614_78.docx @ 1624780 @ 3 @ 1 

 

3.4.1 

Stopping and securing the machine  

Pos: 18.9.3 /BA/Sicherheit/3. SicherheitsroutinenMaschine stillsetzen und sichern - mit und ohne Unterlegkeilen und ohne Feststellbremse @ 488\mod_1483427611768_78.docx @ 3283255 @  @ 1 

 

 

WARNING! 
Crushing hazard due to movement of the machine or machine parts

 

If the machine has not been shut down, the machine or machine parts may move 
unintentionally. People may be seriously injured or killed as a result. 
• 

Before leaving the tractor cabin: Shut down and safeguard the machine. 

 
To shut down and safeguard the machine: 
• 

Park the machine on a stable, horizontal and even surface. 

• 

Switch off the drives and wait until coasting parts have come to a standstill. 

• 

Switch off tractor engine, remove the ignition key and take it with you. 

• 

Secure the tractor against the possibility of rolling back. 

 

Pos: 18.9.4 /Überschriften/Überschriften 3/A-E/A/Angehobene Maschine und Maschinenteile sicher unterbauen @ 190\mod_1381323662799_78.docx @ 1624809 @ 3 @ 1 

 

3.4.2 

Supporting lifted machine and machine parts securely  

Pos: 18.9.5 /BA/Sicherheit/3. Sicherheitsroutinen/Angehobene Maschine und Maschinenteile sicher unterbauen_ALTE FORM @ 277\mod_1404810762702_78.docx @ 2077603 @  @ 1 

 

 

WARNING! 
Risk of injury due to movement of the machine or machine parts

 

If the machine is not supported securely, the machine or machine parts may roll, fall or drop. 
As a result, people may be seriously injured or killed. 
• 

Before working on or under raised components: Securely support machine or machine 
parts. 

 
To securely support the machine or machine parts: 
• 

Shut down and safeguard the machine, see chapter Safety, "Shutting down and 
safeguarding the machine". 

• 

Before performing any work on or under raised machine parts, lower the machine parts or 
secure them mechanically with rigid safety supports (e.g. support stand, crane) or with a 
hydraulic shut-off device (e.g. stop cock) to prevent them from dropping. 

• 

Never support the machine or machine parts with materials which can buckle. 

• 

Never support the machine or machine parts with hollow blocks or bricks. Hollow blocks or 
bricks may break under continuous load. 

• 

Never work under the machine or machine parts which are held up by a car jack. 

 

Pos: 18.9.6 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды