manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 73

 

Operation

 

73 

 

Pos: 38.1 /Überschriften/Überschriften 1/A-E/Bedienung @ 0\mod_1199789505403_78.docx @ 34825 @ 1 @ 1 

 

10 Operation 

 

Pos: 38.2 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 38.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 38.4 /BA/Bedienung /Schwader/Achtung Maschine ist für Vorwärtsfahrt konzipiert. @ 291\mod_1410427944026_78.docx @ 2294406 @  @ 1 

 

 

CAUTION! - Do not drive in reverse when using the machine for work. 

Effect: Damage to the machine. 
The machine is designed to travel forwards. Never reverse while the machine is in switched on 
and in working position. Lift rotors first. 

 

Pos: 38.5 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды