manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 84

Operation

 

 

84 

 

Pos: 38.21.1 /Überschriften/Überschriften 2/A-E/EEin- oder Zweischwadablage einstellen (optional) @ 165\mod_1366695682505_78.docx @ 1433823 @ 2 @ 1 

 

10.8 

Switching from One Side Swath to Two Individual Swaths (optional)  

Pos: 38.21.2 /Überschriften/Zwischenüberschriften/A-EBei Ausführung Twin @ 239\mod_1395066400522_78.docx @ 1886340 @  @ 1 

 

For Twin design 

Pos: 38.21.3 /BA/Sicherheit/7. Gefahrenhinweise alt/Schwader/Gefahr Ausfahren der Kreisel @ 2\mod_1202740509783_78.docx @ 60834 @  @ 1 

 

 

Danger! - Unexpected movements of the machine 

Effect: Danger to life or serious injuries. 
No one is permitted in the area of the rotors when the rotors are extended! 
• 

Instruct persons to leave the dangerous area. 

• 

If necessary, switch off the machine immediately. 

 

Pos: 38.21.4 /BA/Bedienung /Schwader/Achtung Hydraulikzylinder nur in Vorgewendestellung umstellen_SW 850 @ 164\mod_1366350810390_78.docx @ 1431254 @  @ 1 

 

 

CAUTION! 

The tines may bent if the hydraulic cylinders (1) are retracted or extended in the working 
position. 
• 

Only retract or extend the hydraulic cylinders in headland position. 

 

Pos: 38.21.5 /Abkürzungen /Abkürzungen sprachneutral/Schwader/TS 620 Twin / TS 680 Twin                 TS 740 Twin @ 307\mod_1416392368461_0.docx @ 2383707 @  @ 1 

 

TS 620 Twin / TS 680 Twin 

 

        Swadro TS 740 Twin 

Pos: 38.21.6 /BA/Bedienung /SchwaderVon Ein- auf Zweischwadablage umstellen_Bild_TS 620/ 680 Twin, TS 740 Twin @ 307\mod_1416391153901_78.docx @ 2383588 @  @ 1 

 

1

1

SW8500003_1

Fig. 47 

Pos: 38.21.7 /Layout Module /----------------Leerzeile-------------------- @ 240\mod_1395147357027_0.docx @ 1890988 @  @ 1 

 

 

Pos: 38.21.8 /Überschriften/Überschriften 3/U-Z/Von Ein- auf Zweischwadablage umstellen_SW 808-1, 810-1, 850 @ 153\mod_1363179884569_78.docx @ 1362536 @ 3 @ 1 

 

10.8.1 

Changing from Single Swathing to Double Swathing 

Pos: 38.21.9 /BA/Bedienung /Schwader/Ein- oder Zweischwadablage einstellen_Von Ein- auf Zweischwad_SW 850 @ 165\mod_1366356952336_78.docx @ 1431933 @  @ 1 

 

• 

Lower or raise the rotors to headland position by using the single-action control unit. 

• 

Extend rotor arms by using the double-action control unit. 

• 

Lower the rotors into working position by using the single-action control unit until the wheels 
of the rotor chassis are on the ground. 

 

Pos: 38.21.10 /Überschriften/Überschriften 3/U-Z/Von Zwei- auf Einschwadablage umstellen_SW 808-1, 810-1, 850 @ 153\mod_1363179891229_78.docx @ 1362595 @ 3 @ 1 

 

10.8.2 

Changing from Double Swathing to Single Swathing 

Pos: 38.21.11 /BA/Bedienung /Schwader/Schwaden/Einschwadablage_Voraussetzung @ 246\mod_1396353990354_78.docx @ 1923102 @  @ 1 

 

Prerequisite: 
– 

The front swath cloth must be swivelled up (refer to chapter Operation “Setting the Front 
Swath Cloth”). 

Pos: 38.21.12 /BA/Bedienung /Schwader/Ein- oder Zweischwadablage einstellen_Von Zwei- auf Einschwad_SW 850 @ 165\mod_1366357022001_78.docx @ 1431962 @  @ 1 

 

• 

Lower or raise the rotors to headland position by using the single-action control unit. 

• 

Retract rotor arms by using the double-action control unit. 

• 

Lower the rotors into working position by using the single-action control unit until the wheels 
of the rotor chassis are on the ground. 

 

Pos: 38.22 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды