manualshive.com logo in svg

Krone Swadro TS 620, Оригинальная инструкция по эксплуатации

Поделиться
Скачать
Krone Swadro TS 620 Скачать руководство пользователя страница 130

Placing in Storage

 

 

130 

 

Pos: 46.1 /Überschriften/Überschriften 1/A-E/Einlagerung @ 0\mod_1197385459120_78.docx @ 19966 @ 1 @ 1 

 

17 

Placing in Storage  

Pos: 46.2 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der grundlegenden Sicherheitshinweise alte Form @ 254\mod_1397485793575_78.docx @ 1953347 @  @ 1 

 

 

WARNING! 
If the basic safety instructions are not followed, people may be seriously injured or 
killed.  

• 

To avoid accidents, the basic safety instructions in the chapter Safety must have been 
read and followed, see chapter Safety "Basic safety instructions". 

 

Pos: 46.3 /BA/Sicherheit/2. Vorangestellte Warnhinweise/WARNUNG - Nichtbeachtung der Sicherheitsroutinen alte Form @ 273\mod_1404117435996_78.docx @ 2058712 @  @ 1 

 

 

WARNING! 
If the safety routines are not adhered to, people may be seriously injured or killed.  

• 

To avoid accidents, the safety routines in the chapter Safety must be read and followed, 
see chapter Safety "Safety routines". 

 

Pos: 46.4 /Überschriften/Überschriften 2/A-E/AAm Ende der Erntesaison @ 0\mod_1197385501276_78.docx @ 19985 @ 2 @ 1 

 

17.1 

At the End of the Harvest Season  

Pos: 46.5 /BA/Einlagerung/Schwader/Einlagerung allgemein @ 2\mod_1202808984326_78.docx @ 61669 @  @ 1 

 

Before placing the machine in winter storage, clean the outside thoroughly. If you use a high-
pressure cleaner to do this Do not keep a stream of water directed at bearing points. After 
cleaning is completed, lubricate all lubrication points. Do not wipe off any grease that comes out 
of 

bearing

 

points. The hardened grease will provide additional protection against moisture. 

Check all movable components such as deflector rollers, joints, tension rollers, etc. to make 
certain they move easily. If necessary remove, clean, grease and remount. If necessary, replace 
with new parts. 

Use only original KRONE replacement parts. 

Disassemble the PTO shaft. Lubricate the inner tubes and the guard tube with grease. Grease 
the lubrication points on the cross joint and grease the bearing rings of the guard tube. 
Repair places with damaged paint and preserve all bare metal places thoroughly with rust 
protection agent. 
Park the machine in a dry location, but not in the vicinity of artificial fertilisers or livestock 
buildings. Repair places with damaged paint and preserve all bare metal places thoroughly with 
rust protection agent. 
 

 

Caution! 

The machine should only be placed on blocks with a suitable vehicle lifting device. Make 
certain that the machine is stable and safe when it is on blocks. 

 
To provide relief for the tyres, set the machine on blocks. Protect the tyres against external 
influences such as oil, grease, direct sunlight , etc. 
Perform the necessary repair tasks during the time immediately after the harvest season. Draw 
up a list of all replacement parts you will need. This will make it easier for your KRONE dealer to 
process your orders and you will be certain that your machine will be ready for use at the 
beginning of the next season. 
 

Pos: 46.6 /Layout Module /---------------Seitenumbruch---------------- @ 0\mod_1196175311226_0.docx @ 4165 @  @ 1 

Содержание Swadro TS 620





















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды